The file 'Philips Norelco 3000, 5000 And 7000 Series Multigroom Beard Trimmer Guards (2, 4, 5mm, …) 3D Printer Model' is (stl) file type, size is 3.9MB.
I lost the 5mm guard for this trimmer, so I designed a replacement.
update: 2 and 4mm versions are also now included
update June 2018 updated STL models to lay flat in intended printing position
update Aug 2020 added 1.5mm and 10mm versions (I have not printed them yet, so leave some feedback if you try them out)
2nd update 2020 added 14, 18, 22, 26 and 30mm versions. (I have not printed them, so leave some feedback if you try them out)
update May 2023 added 6, 7 and 8mm that seemed to be the most requested. (I have not printed them, so leave some feedback if you try them out)
printer: MP Select Mini
layer height: 0.1mm (black), 0.175mm (clear)
material: PLA @ 200C, 50C bed
slicer: Cura 15
support: "touching buildplate"
platform adhesion: none (I actually used brim on the black print, but it stuck to the comb blades)
modeling: Fusion 360
(black) Sanded comb blades with 100 grit, rounding the pokey things for comfort.
(clear) Printed without brim - no sanding needed.
| TrimmerGuard-6mmV1.stl | 1.2MB | |
| TrimmerGuard-7mmV1.stl | 1.2MB | |
| TrimmerGuard-8mmV1.stl | 1.3MB | |
| TrimmerGuard-PhilipMG3750-10mm_v2.stl | 1.4MB | |
| TrimmerGuard-PhilipMG3750-14mm_flat.stl | 1.3MB | |
| TrimmerGuard-PhilipMG3750-18mm_flat.stl | 1.3MB | |
| TrimmerGuard-PhilipMG3750-1_5mm.stl | 1005.1KB | |
| TrimmerGuard-PhilipMG3750-22mm_flat.stl | 1.4MB | |
| TrimmerGuard-PhilipMG3750-26mm_og_flat.stl | 1.5MB | |
| TrimmerGuard-PhilipMG3750-2mm_flat.stl | 1.8MB | |
| TrimmerGuard-PhilipMG3750-30mm_flat.stl | 1.2MB | |
| TrimmerGuard-PhilipMG3750-4mm_flat.stl | 2.1MB | |
| TrimmerGuard-PhilipMG3750-5mm.stl | 1.8MB |
