Simple remix of chmeee's excellent Uno Card box.
https://www.thingiverse.com/thing:1593081
I changed the oval cut out (matches Uno card logo) into a rectangle to fit the Phase 10 cards logo.
Same printing as chmeee's box:
2 perimeters
2-3 top/bottom layers
15%-20% infill
Note: Rotate the top of the box so that the flat side is on the print bed before printing.
| Phase_10_Card_Box_Bottom.stl | 41.4KB | |
| Phase_10_Card_Box_Top.stl | 45.5KB |
