Phantasm : Sentinel Sphere 3D Printer Model
The file 'Phantasm : Sentinel Sphere 3D Printer Model' is (stl) file type, size is 951.5KB.
The file 'Phantasm : Sentinel Sphere 3D Printer Model' is (stl) file type, size is 951.5KB.
I made this from scratch using pictures as reference. I borrowed the worm gear model from Johann517's Spider Rover and modified it slightly. You can view the original design at:
http://www.thingiverse.com/thing:468872
This is the famous killer metallic sphere from the 1979 cult movie classic "Phantasm". If you haven't seen this horror film, then you must be living underneath a rock. You will need to print out two blades. The sphere has pre-made slots you can stick the blades into. You might need to file or trim the slots to make a good fit. I was thinking about casting a life size aluminum version and polishing it to a mirror shine. You could also use chrome spray paint and some clear coat. I would recommend using support material just to be on the safe side.
EDIT 05-16-2016: I cut the bottom half with the drill into two pieces for easier printing. Just glue the two bottom pieces named bottom_a and bottom_b to make up the bottom portion of the sphere. I used Zatoichi's make where he split the bottom drill part into two pieces as inspiration. Thank you.
Please do not use this model for commercial purposes.
| blade.stl | 5.2KB | |
| bottom.stl | 585.4KB | |
| bottom_A.stl | 463.2KB | |
| bottom_B.stl | 155.9KB | |
| onepieceslotted.stl | 876.2KB | |
| topslotted.stl | 339.4KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
