Are you tired of your most expensive Gunpla locked into boring standing poses, or limited by the confines of the terrible, flimsy-feeling (and often woefully short) display stands that only some of them come with? Well worry no more!

These are designed to attach to a 5/8 inch screw thread common to microphone stands. These stands use standardised components, meaning you can usually customise them for the height of your choosing, and you can add gooseneck elements to allow you to easily change the angle your kit is displayed at. I'd recommend buying one with a weighted base

These will securely hold a PG Strike Gundam or Astray, a PG 00 Gundam, or a PG Gundam Exia. Because microphone stands can be hollow, I've added a small hole in the Exia stand to let you route the LED power cable through it - I'd suggest a maximum stand height of no more than about 30cm if you choose to do this as you're limited by the cable length. I'm planning on adding a riser underneath the stand to hide the LED box for mine.

I'd suggest using 100% infill for these - I don't know if that's strictly necessary, but I'm not going to risk damaging a kit I've spent 50 hours building and painting. My examples are printed on an Ankermate M5C using a standard filament, and they're quite sturdy.