PEX96 – Micro FPV Quadcopter Brushless 96mm Frame 3D Printer Model
The file 'PEX96 – Micro FPV Quadcopter Brushless 96mm Frame 3D Printer Model' is (stl) file type, size is 334.4KB.
The file 'PEX96 – Micro FPV Quadcopter Brushless 96mm Frame 3D Printer Model' is (stl) file type, size is 334.4KB.
Hello folks
I was looking for a caged frame under 100mm for interior/exterior FPV and could not find one, so I designed my own.
This frame is designed for 20x20mm FC and ESC mount and for 19/2035 propellers, this is a 96mm class frame with holes for 1103/1105 motors (Racerstar BR1103 and DYS BE1104 motors have been tested)
I build this frame around the parts I wanted so I recommend to check my part list:
It is compatible with the Eachine MiniCube and all 20x20 mouting FC and ESC.
You will need 14 M3 nylon spacers (20mm) + 28 M3 screws (6 to 8mm)
It should be very durable and lightweight depending on your filament type and quality. I would recomment to use Nylon or Carbon fiber filament.
I will add mounts/adapters/parts soon (camera & VTX mount, landing pads...)
Check my Camera mount (WIP): http://www.thingiverse.com/thing:2208985
!!! ------ Note that I can print it for you in Black Alloy 910 Nylon and send a full kit including spacers and screws! =------ !!! Order a full kit here :)
It takes me a lot of time to design these parts from scratch. Please help me develop new parts and release them for free / pay me a beer to say thanks on http://paypal.me/supportp3x
| PEX96_-_Bottom_V0.4.stl | 458.5KB | |
| PEX96_-_Bottom_V0.5.stl | 433.1KB | |
| PEX96_-_Top_V0.3.stl | 267.5KB |
