ESP32-driven, Internet-connected pet treat dispenser.
Setup instructions: https://blog.christophermullins.com/2019/06/11/pet-treat-dispenser/
ESP32 firmware: https://github.com/sidoh/treat_dispenser
| Body_Base.stl | 311.7KB | |
| Body_Top.stl | 2.8MB | |
| Camera_Arm.stl | 67.2KB | |
| Camera_FacePlate.stl | 58.2KB | |
| Dispenser_Head.stl | 180.0KB | |
| Dispenser_LargeGear.stl | 330.0KB | |
| Dispenser_Shaft.stl | 123.2KB | |
| Dispenser_SmallGear.stl | 291.0KB | |
| Hopper_Body.stl | 1.1MB | |
| Hopper_Lid.stl | 311.9KB |
