PET-Kanna 3D Printer Model
The file 'PET-Kanna 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'PET-Kanna 3D Printer Model' is (stl) file type, size is 1.4MB.
I modified this soda bottle watering can adapter to make the stream a bit softer on the soil in my smaller pots. For the small streams to not just join again after the nozzle, it is essential that the holes are small. If your printer/filament setup fuses the holes together, drill them out with a 1-1,5mm drill bit. This is not for pouring large amounts of water since that will take forever!
In the spirit of the original thing, I call it PET-Kanna in reference to the Swedish word vattenkanna :)
| PETKanna.stl | 4.0MB |
