PET Filament Recycler Updated Version 3D Printer Model
The file 'PET Filament Recycler Updated Version 3D Printer Model' is (stl,3mf) file type, size is 41.4MB.
The file 'PET Filament Recycler Updated Version 3D Printer Model' is (stl,3mf) file type, size is 41.4MB.
| Back_body.stl | 1.1MB | |
| Bearing_spacer.stl | 112.6KB | |
| Board_casing.stl | 735.3KB | |
| Board_casing_cover.stl | 356.4KB | |
| Bottom_L_body_spacer.stl | 571.0KB | |
| Bottom_R_body_spacer.stl | 149.3KB | |
| BOT_MID_BODY_SUP.stl | 103.4KB | |
| Fil_guide_gear.stl | 3.4MB | |
| Front_body.stl | 967.1KB | |
| Front_mk_8_nut_fit.stl | 128.4KB | |
| Gear_lock.stl | 129.8KB | |
| Grill_cover_optional.stl | 40.8KB | |
| Hot_end_base.stl | 790.0KB | |
| Lcd_back.stl | 146.0KB | |
| lcd_front.stl | 1.5MB | |
| Main_spool_spacer.stl | 140.7KB | |
| Metal_rod_7mm_diameter_109_mm_long.stl | 28.5KB | |
| Metal_rod_7_mm_diameter_66_mm_long.stl | 28.8KB | |
| Metal_rod_7_mm_for_spooling_gear_53_mm_long.stl | 30.1KB | |
| Motor_drive_gear.stl | 9.6MB | |
| motor_gear.stl | 2.8MB | |
| M_8_fitting_to_body_back.stl | 197.0KB | |
| Part_Studio_1_-_Spacer_worm_gear.stl | 140.7KB | |
| Part_Studio_1_-_Top_R_body_spacer.stl | 148.7KB | |
| Ribbon_spool_base.stl | 380.3KB | |
| Ribon_spool_holder.stl | 210.0KB | |
| Smooth_spooling_gear_69_teeth.stl | 2.0MB | |
| spacer_for_board_casing.stl | 55.4KB | |
| spacer_for_board_casing_1.stl | 56.3KB | |
| Spacer_spool_drive_gear.stl | 56.3KB | |
| Spool_drive_gear.stl | 1.8MB | |
| Spool_fil_drive_gear.stl | 8.7MB | |
| Spool_front.stl | 655.4KB | |
| Spool_gear_55_teeth.stl | 6.9MB | |
| Spool_main.stl | 658.4KB | |
| StripedPaint.3mf | 12.0MB | |
| Top_L_body_spacer.stl | 324.2KB | |
| top_M_body_spacer.stl | 58.3KB | |
| vorm_gear_drive_70_teeth.stl | 2.3MB | |
| Worm_gear.stl | 23.9MB |
