Made for a std security/ amplimesh/ barrier door 0or w/e you call them in ur neck of the woods.
Would suggest abs or petg for frame and transparent clear filament for the flap.
6 - 6g x 3/4 csk screws s/s , slot is for 5 or 6mm spline to hold flyscreen, small rare earth magnet 15mm x6mm in base of frame and a small 3mm piece of steel in the flap
| flap.stl | 73.8KB | |
| inside.stl | 95.6KB | |
| outside.stl | 52.4KB |
