PET Bottle Bird Feeder 3D Printer Model Free Download

Description Files (8)

Summary

PET Bottle bird feeder fits on any PCO 1881 neck finish standard threaded PET bottles like most soda bottles like Coca-Cola, Mountain Dew, Fanta, etc. I created this for the birds tweeting outside my apartment complex in a hope of reusing some of the soda bottles. :)

Model Notes:

Bases with varying holes (3 or 4, large or small) are included so you can print whatever suits your bird feed. The small hole versions will comply with most standard bird feed mixes.
The "Augment" file which will help you adjust the hole opening on 3 & 4 large hole versions in the case you want to change it to a small hole but don't want to print the whole part again. It simply inserts into the current design. This saves you time and material.
The 4 hole clamp goes on the top of the bottle so you can attach some twine or threads to it for hanging. Sling the clamp onto the bottle and shut it close using a small cable tie as shown in the pictures. Pictured is some butcher's twine of 16 ply strength.
If you don't have a suitable location to hang, you can print the hanging stand included in the files and attach it with a strong tape.
All parts print without support.

If you have trouble downloading any STLs, please let me know in the comments below. Thingiverse has been acting up again! :(

Happy printing! :)

4_Hole_Bottle_Clamp_Final.stl	1.5MB
Base_3_Large_Hole_Final.stl	3.0MB
Base_3_Small_Hole_Final.stl	3.0MB
Base_4_Large_Hole_Final.stl	3.2MB
Base_4_Small_Hole_Final.stl	3.2MB
Base_Large_Hole_Augment_Final.stl	579.0KB
Bird_Feeder_Stand_Final.stl	960.6KB
Bird_Feeder_Stand_Final_Optimized.stl	960.6KB

PET Bottle Bird Feeder 3D Printer Model

Summary

Tags

You might also like