Printed with a Anycubic Kobra Plus and sliced with Ultimaker Cura:
Can be printed with PLA, PLA+, PETG.
But please use a more temperature resistant material if you are in a hot environment, as PLA will indeed warp in the heat.
Ultimaker Cura Settings:
Quality:
Layer Height = 0.4
Walls:
Thickness = 1.2
Line Count = 4
Horizontal Expansion = 0.0
Top/Bottom:
Top/Bottom Thickness = 0.8
Top/Bottom Layers = 4
Infill:
Density = 20.0
Pattern = Gyroid
Material:
Printing Temp = 230.0
Build Plate Temp = 80.0
Speed:
Print speed = 80.0 mm/s
Travel:
Enable retraction = yes
Cooling:
Enable Print cooling = yes
Fan speed = 100%
Support:
Generate Support = yes
Support Structure = Normal
Support Placement = Everywhere
Support Overhang Angle = 50.0
Support Horizontal Expansion = 0.8mm
Build Plate Adhesion:
Build Plate Adhesion Type = None
| Personal_Size_Tissue_Holder_w_clip.stl | 58.0KB |
