Based on this design: https://www.thingiverse.com/thing:158300
To make numbers more visible, changed the way rings are printed. Split them in inner ring and outer band which is being printed in two colors. Then band need to be bend with hot air and glued with hot glue gun.
| cal-inner.stl | 123.5KB | |
| calendar_-_holder.stl | 6.3KB | |
| dec_1.stl | 7.3KB | |
| dec_2.stl | 30.7KB | |
| dec_3.stl | 51.3KB | |
| month.stl | 172.3KB | |
| m_1.stl | 7.3KB | |
| m_10_1.stl | 7.3KB | |
| m_10_2.stl | 37.4KB | |
| m_11_1.stl | 7.3KB | |
| m_11_2.stl | 7.3KB | |
| m_12_1.stl | 7.3KB | |
| m_12_2.stl | 30.7KB | |
| m_2.stl | 30.7KB | |
| m_3.stl | 51.3KB | |
| m_4.stl | 2.8KB | |
| m_5.stl | 33.5KB | |
| m_6.stl | 53.6KB | |
| m_7.stl | 11.0KB | |
| m_8.stl | 66.3KB | |
| m_9.stl | 53.6KB | |
| tens-base.stl | 45.4KB | |
| units.stl | 145.0KB | |
| u_0.stl | 37.4KB | |
| u_1.stl | 7.3KB | |
| u_2.stl | 30.7KB | |
| u_3.stl | 51.3KB | |
| u_4.stl | 2.8KB | |
| u_5.stl | 33.5KB | |
| u_6.stl | 53.6KB | |
| u_7.stl | 11.0KB | |
| u_8.stl | 66.3KB | |
| u_9.stl | 53.6KB |
