Perfectdraft Adapter For Refilling Kegs 3D Printer Model
The file 'Perfectdraft Adapter For Refilling Kegs 3D Printer Model' is (stl) file type, size is 70.3KB.
The file 'Perfectdraft Adapter For Refilling Kegs 3D Printer Model' is (stl) file type, size is 70.3KB.
Adapter used to refill Philips perfectdraft kegs with your own beer or any liquid.
Install the adapter on the head of the Perfectdraft tap and connect it to a vaccum pump via a 6mm I.D. hose.
I use a small peristaltic pump which can also be used to pressurize and drain the keg.
Connect the hose of the PerfectDraft tap adapter to a hose connected to your bucket or fermenter. Purge the air from the hose before starting the keg filling.
The keg must first be sanitized by filling it with a cleaner.
| Perfectdraft_Adapter.stl | 768.1KB |
