Pentax D-LI68 Battery And SD / MicroSD Holder (with STEP File) 3D Printer Model
The file 'Pentax D-LI68 Battery And SD / MicroSD Holder (with STEP File) 3D Printer Model' is (stl,stp) file type, size is 2.4MB.
The file 'Pentax D-LI68 Battery And SD / MicroSD Holder (with STEP File) 3D Printer Model' is (stl,stp) file type, size is 2.4MB.
UPDATE 8/26/2021 - I uploaded the STEP file for easier remixing.
These are battery and SD/MicroSD card holders for a Pentax D-LI68 battery (for the Pentax Q). There are 6 total, with 3 types, plain, with an SD card holder and with a Micro SD card holder. Each type has a model with a clip and without a clip. The models with clips will print with supports unless you crank up the overhang %. I printed some with supports (lines) and they were easily removed so that is how I would recommend printing them. I did only printed the micro-SD version with the clip so far and it fits the battery, and micro SD cards pretty good but everyone's printer is a bit different.
I'd also recommend using more than 40% infill and walls that are at least 0.8mm thick, so the clip has enough strength, I printed with 40% and it does not seem to be weak. Please orient these so they print with the open end up.
Current version is M3
| Pentax-D-LI68-1M3-BASIC.stl | 523.9KB | |
| Pentax-D-LI68-1M3-clip.stl | 749.5KB | |
| Pentax-D-LI68-1M3-mSD-clip.stl | 787.4KB | |
| Pentax-D-LI68-1M3-mSD.stl | 563.3KB | |
| Pentax-D-LI68-1M3-SD-clip.stl | 774.6KB | |
| Pentax-D-LI68-1M3-SD.stl | 464.0KB | |
| Pentax-D-LI68-1M3.stp | 5.4MB |
