My fully-functional 4-layer pentagonal prism twisty puzzle. The top and bottom layers can turn by 72 degrees and the side layers can turn by 180 degrees. This puzzle cannot shapeshift.
To make this puzzle, print each part by the number indicated on the filename:
You need 7 M3 screws and 7 springs. I might recommend sanding the ends of the screws down, otherwise you need to screw them in almost the entire way. Standard 3x3 screws can be used, and they can be bought here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The stickers on the 3x4 side faces are standard 57mm 3x3 stickers. The top and bottom stickers can be cut from the sticker template.
| alignment_x1.stl | 235.0KB | |
| core_x1.stl | 457.0KB | |
| hidden_center_x5.stl | 384.9KB | |
| hidden_edge_x5.stl | 282.5KB | |
| long_corner_x10.stl | 197.6KB | |
| long_top_edge_x10.stl | 242.5KB | |
| pentagonal_stickers.pdf | 98.4KB | |
| short_corner_x10.stl | 270.1KB | |
| short_top_edge_x10.stl | 252.0KB | |
| top_center_cap_x2.stl | 142.0KB | |
| top_center_x2.stl | 315.0KB |
![Pi Cube 5 [remix] 3D Printer Model](https://res.3axis.co/25af9db7-bdc1-414f-9922-52d4ae8d0b55/images/a2e1fdd6-4146-43e7-8339-79b01f6c318e_thumb.jpg)
