Pelton Turbine 3D Printer Model
The file 'Pelton Turbine 3D Printer Model' is (stl) file type, size is 309.9KB.
The file 'Pelton Turbine 3D Printer Model' is (stl) file type, size is 309.9KB.
https://www.youtube.com/watch?v=kokhW3gyAkU
We (the natural sciences course (class 9)) of the Herta-Lebenstein-Realschule in cooperation with the Projekt-Akadamie from the IGS-Aurich) designed a complex model of a pelton turbine, which provided a little radio with electricity (or many LEDs). On the video you can see how the model works.
You will need the following components for assembly:
2 ball-bearings (6x12x4 mm) or you use the simpel rings
18 nuts (M3)
18 screws (M3)
1 threaded rod (M5)
2 washers (M5)
4 nuts (M5)
electric motor (Johnson 12 V 008 03 23311 is a good choice)
We wish you a lot of joy with our model.
We would also be very happy about constructive feedback!!!
Take a look at our other projects.
| Motorschutz.stl | 17.1KB | |
| Motor_Halterung.stl | 50.5KB | |
| PrototypPeltonDach.stl | 249.8KB | |
| Ring.stl | 26.8KB | |
| Schaufel.stl | 220.4KB | |
| Schaufelkreis.stl | 118.1KB | |
| Untergrund1.1.stl | 211.0KB | |
| Zahnrad24.stl | 286.0KB | |
| Zahnrad6.stl | 74.7KB |
