PEI Magnetic Build Plate Corner Alignment 3D Printer Model
The file 'PEI Magnetic Build Plate Corner Alignment 3D Printer Model' is (STL) file type, size is 11.6KB.
The file 'PEI Magnetic Build Plate Corner Alignment 3D Printer Model' is (STL) file type, size is 11.6KB.
Since changing my build plate from glass to PEI magnetic sheet getting the alignment right was a little tricky and although not critical my OCD didn’t like this.
I looked at a few designs others had created, but none would work with the Ender 3 V2 due to the cables that connect to the bed.
These corner catchers help align the build plate when you're done cleaning the surface or removing a print. To adhere I used double sided tape gorilla flavour to hold.
All could be used with many other printer bands.
I choose to use PLA but any filament of your choice.
There are three files:
PEI Magnetic Build Plate Corner Alignment NO Cutout
PEI Magnetic Build Plate Corner Alignment Rear Left Cutout
PEI Magnetic Build Plate Corner Alignment Rear Right Cutout
| PEI_Magnetic_Build_Plate_Corner_Alignment_NO_Cutout.STL | 18.2KB | |
| PEI_Magnetic_Build_Plate_Corner_Alignment_Rear_Left_Cutout.STL | 18.6KB | |
| PEI_Magnetic_Build_Plate_Corner_Alignment_Rear_Right_Cutout.STL | 18.6KB |
