Got wrenches (called spanners in the better parts of Europe) that you'd like to hang on your pegboard?
So did I.
Ring-Spanners are EASY to hang up.... they have a ring that can be placed over a hook.
So how to hang up OPEN-ENDED spanners on your pegboard?
Here's how.
The spanner handle goes between the round pegs on the front and the curved head of the spanner rests on them.
As provided the holder with accept spanners with a HEAD diameter down to 17mm, otherwise the head slips between the posts.
If you want to hold smaller spanners, then the Fusion360 file is provided and may be parametrically modified.
UPDATED... Due to problems with the peg. Should be better now.
UPDATED 2017Oct06 - NOW includes LARGE and SMALL versions too... AS PROMISED!
Made for standard 1" pegboard with 6mm holes that is approx. 1.5mm thick, however, the Fusion360 file is provided so you can parametrically modify the hole separation, the hole diameter and the thickness of the board so the hooks hang on snuggly to your own board.
Enjoy.
| PegboardWrenchHolder-Large.stl | 573.1KB | |
| PegboardWrenchHolder-Small.stl | 659.3KB | |
| PegboardWrenchHolder_v6.f3d | 135.8KB | |
| PegboardWrenchHolder_v6.stl | 638.9KB | |
| PegboardWrenchHolder_v9.f3d | 232.3KB |
