EDIT: July 31, 2020 - Added a 1/4" socket holder. This holder holds 1/4" sockets and has 9 pegs for sockets. I printed 2, one for metric and one for SAE. I am working on a 3/8" and a 1/2" version now.
EDIT: July 18, 2020 - Added the Strap Clamp Holder. This will hold 2 strap clamps. (https://www.thingiverse.com/thing:4489935) or 2 commercial strap clamps.
Pegboard files I am currently using in my workshop.
Some in the picture were made with Pegstr - Pegboard Wizard: https://www.thingiverse.com/thing:537516
I will add more as I save them from Fusion360 and as I make new ones that I need.
I use this for router bits: Router Bit Pegboard Caddy - https://www.thingiverse.com/thing:3336979/files
Use plenty of perimeters for extra rigidity...I use 5 or 6 with 40% infill. Most parts are nothing but perimeters.
| Pegboard-0.25_Socket_holder.stl | 1.9MB | |
| Pegboard-0.375_Socket_holder.stl | 2.2MB | |
| Pegboard-Airbrush_Paint_Holder.stl | 1.3MB | |
| Pegboard-Allen_Wrench.stl | 468.8KB | |
| Pegboard-Bin.stl | 406.9KB | |
| Pegboard-Chisel_Holder.stl | 907.9KB | |
| Pegboard-Dremel_Bit_Holder.stl | 1.7MB | |
| Pegboard-Drill_Front.stl | 541.7KB | |
| Pegboard-Drill_Rear.stl | 727.5KB | |
| Pegboard-Lathe_Tool.stl | 1004.4KB | |
| Pegboard-Lathe_Tool_Flat.stl | 624.5KB | |
| Pegboard-Lathe_Tool_Small.stl | 961.7KB | |
| Pegboard-Long_Hook_Belt_Sander.stl | 520.6KB | |
| Pegboard-Nutdriver_Metric.stl | 3.0MB | |
| Pegboard-Nutdriver_SAE.stl | 3.0MB | |
| Pegboard-Rod_Holder_wire_spool_or_paper_towel.stl | 622.6KB | |
| Pegboard-Small_Hook.stl | 1.0MB | |
| Pegboard-Strap_Clamp_Holder.stl | 641.1KB | |
| Pegboard-Tape_Holder.stl | 663.6KB | |
| Pegboard-Tape_Measure_Tray.stl | 759.0KB |
