Note! Of all my things, this is one of my least favorite designs. It flops around quite a bit and makes me sad whenever I put the drill in or take it out. Been thinking about how to fix it but haven't taken the time because although this isn't great it's still functional. So, be warned. Someday I'll get around to remixing it, but you might also consider some of the many other excellent designs out there.

Needed a drill holder for my pegboard, and found the original which I liked, but I'm almost never content with leaving something alone. Loaded the STLs up in SketchUp and chopped off the original right-angle pegboard hook and swapped the pegs from my 2 position blank which I've found work well. The drill I'm hanging also isn't as heavy as the original was designed for, so I cut off the lower extension and simplified the design. I removed all the holes as the weight of these parts really isn't an issue and having to print the shells for each hole would really slow down the print time.

I've got two variations on the design, drill-holder-large and drill-holder-small are the large and small ends in a 6mm width with the pegboard hooks offset to the edge so these can be printed laying flat with no supports. I found them to be perfectly effective but they moved around a bit on the pegboard, so I designed the wider versions which have the pegs centered on the back. These require a small amount of support but sit nicer on the pegboard.