3D whirligig of a Mobile Gas Pegasus
Laid out to print in 2 colors with 2 layers of top color @.2mm thickness
Setup to print on smaller printers with the body as 4 separate parts
Need a couple of #8 x 1" wood screws to hold the wing blocks
| cardinal_wing_blocks.stl | 14.1KB | |
| pegasus_head_right.stl | 1.3MB | |
| pegasus_tail_left.stl | 661.1KB | |
| pegasus_tail_right.stl | 662.9KB | |
| pegasus_wing.stl | 970.6KB | |
| pegusus_head_left.stl | 1.3MB | |
| pin_.14_dia.stl | 4.6KB |
