Pegaso 1080 For Mr.Crankyface’s Chassis (Cab) 3D Printer Model
The file 'Pegaso 1080 For Mr.Crankyface’s Chassis (Cab) 3D Printer Model' is (stl) file type, size is 332.9KB.
The file 'Pegaso 1080 For Mr.Crankyface’s Chassis (Cab) 3D Printer Model' is (stl) file type, size is 332.9KB.
This body is specially designed for Mr.CrankyFace chassis. You can find al the mechanical parts in the following links:
Frame: https://www.thingiverse.com/thing:1695694
Rear Axle: https://www.thingiverse.com/thing:1676173
Front Axle: https://www.thingiverse.com/thing:1651135
Gearbox: https://www.thingiverse.com/thing:1704988
Central Gearbox: https://www.thingiverse.com/thing:1680949
I also designed these shock aboserbers specially for this truck. I've tested them and they work pretty good.
Shock absorbers: https://www.thingiverse.com/thing:2252957
When I designed this body some time ago, I wanted to use as less PLA as possible. That is why I just designed the "skin" of the body and then I used 5mm plywood in order to make the body stronger. So the entire design is prepared to use 5mm plywood as you can see in the photos. You will have to glue all the parts and I highly recommend using mounting putty because it makes easier to assemble
The cab is fixed to the frame with the "chassis joints" and 4 M3x20mm screws.
You will also need to make one hole in each "wing" part in order to screw the chassis joints. (Design mistake that I have to solve)
Feel free to remix the cab in order to make it 100% printable or whatever you want.
Here you will only find the cab files. In order to build the entire Pegaso 1080 you will also need this other parts:
Rear Box: https://www.thingiverse.com/thing:2638780
Wheels: https://www.thingiverse.com/thing:2648302
Accessories: (In progress)
UPDATE 27/11/2017
Error: Wrong scale in "Windscreen_joint_left"
UPDATE 28/11/2017
Error: "Left_Side_Down.gcode" should be "Left_Side_Down.stl"
| Back_Side_Down.stl | 23.1KB | |
| Back_Side_Up.stl | 153.8KB | |
| Bumper.stl | 176.7KB | |
| Chassis_Joints.stl | 47.0KB | |
| Front_Side.stl | 977.1KB | |
| Headlight.stl | 179.4KB | |
| Insignia.stl | 190.4KB | |
| Left_Side_Down.stl | 317.6KB | |
| Left_Side_Up.stl | 101.5KB | |
| pegaso_letters.stl | 71.4KB | |
| Right_Side_Down.stl | 317.5KB | |
| Right_Side_Up.stl | 101.5KB | |
| Roof.stl | 182.6KB | |
| Windscreen_joint.stl | 44.8KB | |
| Windscreen_Joint_Left.stl | 1.4KB | |
| Windscreen_Joint_Right.stl | 7.7KB | |
| Wing_Left.stl | 160.9KB | |
| Wing_Right.stl | 160.9KB |
