A handy storage container with a flexible lid which provides a good seal.
Body should be printed with any rigid filament, the lid should be printed with any flexible filament.
I've provided the parameterized Fusion 360 archives and STEP files. You will also be able to change the side just by scaling in your slicer, pick the closest starting point and scale to fit.
If you like it, please hit like!
Be sure to check out my other designs, including more storage containers and 3D printed HiFi speakers and subwoofers
| Peely_Lid_R1_Narrow_v1.f3d | 110.3KB | |
| Peely_Lid_R1_Narrow_v1.step | 54.6KB | |
| Peely_Lid_R1_Narrow_v1_Peely_Lid_R1_Narrow_v1_Can_1_Can_Can.stl | 625.7KB | |
| Peely_Lid_R1_Narrow_v1_Peely_Lid_R1_Narrow_v1_Can_1_taller_can_Can.stl | 723.1KB | |
| Peely_Lid_R1_Narrow_v1_Peely_Lid_R1_Narrow_v1_Can_1_tallest_can_Can.stl | 765.3KB | |
| Peely_Lid_R1_Narrow_v1_Peely_Lid_R1_Narrow_v1_Can_1_tall_can_Can.stl | 681.5KB | |
| Peely_Lid_R1_Narrow_v1_Peely_Lid_R1_Narrow_v1_Lid_1_Body1_Lid.stl | 689.8KB | |
| Peely_Lid_R1_Wide_v1.f3d | 103.0KB | |
| Peely_Lid_R1_Wide_v1.step | 54.7KB | |
| Peely_Lid_R1_Wide_v1_Peely_Lid_R1_Wide_v1_Can_1_Can_Can.stl | 587.1KB | |
| Peely_Lid_R1_Wide_v1_Peely_Lid_R1_Wide_v1_Can_1_taller_can_Can.stl | 653.7KB | |
| Peely_Lid_R1_Wide_v1_Peely_Lid_R1_Wide_v1_Can_1_tallest_can_Can.stl | 687.0KB | |
| Peely_Lid_R1_Wide_v1_Peely_Lid_R1_Wide_v1_Can_1_tall_can_Can.stl | 620.4KB | |
| Peely_Lid_R1_Wide_v1_Peely_Lid_R1_Wide_v1_Lid_1_Body1_Lid.stl | 851.4KB |
