PedalPCB.com 125B Guitar Pedal Build Platform 3D Printer Model
The file 'PedalPCB.com 125B Guitar Pedal Build Platform 3D Printer Model' is (stl) file type, size is 452.3KB.
The file 'PedalPCB.com 125B Guitar Pedal Build Platform 3D Printer Model' is (stl) file type, size is 452.3KB.
This is a build platform for PedalPCB.com 125B sized projects. It will hold the most popular knob configurations in place while soldering and doing the off board wiring. The bottom can be used as a place to store components while working on your pedal or as a way to hold your board at different angles while you solder. The original version has the DC jack located in the location on the drill guide, rev1 has it in my preferred location between the input jacks. This is designed to print in .25mm tall layers with a width of .5mm.
The 4 small inline holes are for the toggle switches on the Hydra delay, which sounds really nice. I recommend building it.
Part 1 is now on revision 2. The only change is that I noticed sometimes the holes for the output jack and DC connector want to break when removing the print in place support. The holes now print as hexagons and if you have your printer dialed to print bridges should print without support. They are shorter than the bridges on benchy so if you can do those you should be able to do this.
| build_platform_1.stl | 588.0KB | |
| build_platform_2.stl | 64.8KB | |
| build_platform_rev1_1.stl | 588.0KB | |
| build_platform_rev1_2.stl | 69.1KB | |
| build_platform_rev2_1.stl | 582.1KB |
