The file 'Peacock X-Ray 3D Printer Model' is (3mf,stl,gcode) file type, size is 47.6MB.
An x-ray of a peacock.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.8
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 6
PLA BambuLab Matte Ash Gray Transmission Distance: 15
PLA BambuLab Basic Jade White Transmission Distance: 3
Swap Instructions:
Start with Charcoal
At layer #4 (0.92mm) swap to Slate Gray Sparkle
At layer #6 (1.32mm) swap to Ash Gray
At layer #8 (1.72mm) swap to Jade White for the rest.
Happy printing, and share your make!
| Peacock_X-Ray_by_TheMazePrinter.3mf | 24.6MB | |
| Peacock_X-Ray_by_TheMazePrinter.stl | 106.3MB | |
| Peacock_X-Ray_by_TheMazePrinter_Front_200x200_PLA_1h58m.gcode | 11.9MB |
