This is a Paintless Dent Repair Mini-Lifter for puling dents using hot glue. Print with 40% inflill and supports. You will need some hardware. I used a 1/4" threaded rod for the center lifter action and 1/4" bolts and nuts to attach the feet, and you need a suitable spring that will fit. I also glue on rubber to the bottom of the feet using glue. It only has 1 1" glue cap, I can make and upload other options later for pulling smaller or larger dents.
| Body_Left.stl | 147.2KB | |
| Body_Right.stl | 148.9KB | |
| Bottom_Lever.stl | 135.2KB | |
| Feet.stl | 50.9KB | |
| Glue_Cap.stl | 24.9KB | |
| Grabber.stl | 29.9KB | |
| Knob.stl | 105.9KB |
