A Suspended Ceiling mount with Clip on Face, for the Supercircuits.com PC504XS Camera.
Rotates 360 degrees, and Can angle down or up.
I needed something to fill a need, and thought I'd share.
This is an inexpensive Day/Night Camera, with BNC Female connection, and Molex Power Connector. Standard 3.5 I believe.
This is a work in progress.
The Base Mounts for the Board Camera that are inside the enclosure don't all match up with the holes. But you really only need one tiny screw to hold in the cameras.
Prints best in Cura 15.04.6 as the enclosure walls are very thin.
But I'm sure someone will be a bit more perfectionist and correct this :-)
Enjoy!
| Cam_arm.skp | 67.9KB | |
| Cam_arm_V3.skp | 63.9KB | |
| Cam_housing_v2.skp | 1.1MB | |
| Cam_mount.skp | 1.1MB | |
| PC504XS_Case_Back.stl | 141.7KB | |
| PC504XS_Case_BackV2.stl | 209.6KB | |
| PC504XS_Case_Front.stl | 44.2KB | |
| suspended_ceiling_Mount_arm.stl | 71.3KB | |
| Suspended_Ceiling_Mount_Arm_V3.stl | 75.1KB | |
| suspended_ceiling_Mount_CameraV2.stl | 154.1KB |
