PC Test Bench 3D Printer Model
The file 'PC Test Bench 3D Printer Model' is (stl,dwg) file type, size is 855.8KB.
The file 'PC Test Bench 3D Printer Model' is (stl,dwg) file type, size is 855.8KB.
I like to build computers but sometimes its difficult to test everything on top of a box.
So I made a Test bench With 3D-printed parts.
I used 2 rectangular pieces of multiplex and put the wholes (7mm) the right measurement which u also can find in the pictures.
Than u can put the "Pin" inside.
Second u have the "Gaficsupp" for the support of the Graphics card. (only item that needs support)
Third U will need the "PSU Mount" for the power supply ATX formfactor. Normally this is a friction fit but u can use a screw for more stability.
Last u can use the "Support" this is for making space between the PSU and the motherboard. This I designed in a few different forms.
U have 3 possibilities:
3x Support 1 + 1x Support 2
3x Support 3 + 1x Support 4
3x Support 5 + 1x Support 6
Or u can even mix
The 2,4 or 6 are at least 1 time needed so u wont intervene with the "Gaficsupp".
I designed this for my own use but if people like the design and want to build this themselves here are the files.
I used this already a couple of times and I find it handy.
Feel free to command and what maybe can change for the better than let me know.
I like the feedback.
Thanks!
| Gaficsupp.stl | 90.1KB | |
| Pin.stl | 13.9KB | |
| PSU_Mount.stl | 135.6KB | |
| Support1.stl | 47.2KB | |
| Support2.stl | 35.6KB | |
| Support3.stl | 53.1KB | |
| Support4.stl | 41.7KB | |
| Support5.stl | 47.0KB | |
| Support6.stl | 35.5KB | |
| Test_Bench.dwg | 3.1MB |
