UPDATE 05/03/22:
I got the filenames confused. Now they are all rightadded 1x2; 5x2; 6x2I wanted to make my own Cable Combs, cause I needed "non-standart" sizes and I dont like the look of those cheap ones.
The different sizes so far are:
1x2
2x2
3x2
4x2
5x2
6x2
7x2
8x2
12x2
19x2
The hole diameter is 3,8mm. The distance between the holes is 4,7mm.
You dont need any rafts or supports. I printed on 100% infill.
If I could help you with my design, consider supporting my caffeine addiction! :P
| cablecomb_12x2.STL | 3.9MB | |
| cablecomb_19x2.STL | 5.6MB | |
| cablecomb_1x2.STL | 1.9MB | |
| cablecomb_2x2.STL | 1.4MB | |
| cablecomb_3x2.STL | 1.8MB | |
| cablecomb_4x2.STL | 2.3MB | |
| cablecomb_5x2.STL | 6.2MB | |
| cablecomb_6x2.STL | 7.1MB | |
| cablecomb_7x2.STL | 2.6MB | |
| cablecomb_8x2.STL | 2.9MB |
