Inizio ringraziando Daniele (https://www.thingiverse.com/atlaware) per il progetto originale!
Mi sono solo permesso di aggiungere qualche piccola modifica per semplificarne l'assemblaggio e facilitare la stampa.
If you have any doubts I recommend that you rely on the original project, the author is certainly more experienced than me
The changes in this version are:
During printing I suggest you add additional infili with cura, see the attached photos!
I print all with 0.4mm nozzle, this is my setup
| wall | infili | thickness | layer bottom | layer top | |
|---|---|---|---|---|---|
| Body | 2 | 15 | 0.2mm | 2 | 2 |
| Tail middle | 1 | 3-2 + internal reinforcement | 0.2mm | 2 | 2 |
| Tail | 1 | 0 + internal reinforcement | 0.2mm | 3 | 2 |
| Wing 1 | 1 | 3 + internal reinforcement | 0.2mm | 3 | 2 |
| Wing 2 | 1 | 5 | 0.2mm | 2 | 2 |
| fuselage_1.stl | 175.8KB | |
| fuselage_2.stl | 145.4KB | |
| fus_door.stl | 17.4KB | |
| fus_door_locker_2.stl | 9.7KB | |
| motor_mount.stl | 246.0KB | |
| tail_1.stl | 123.2KB | |
| tail_1_with_support.stl | 123.2KB | |
| tail_2.stl | 210.5KB | |
| wing_right_1.stl | 108.8KB | |
| wing_right_2.stl | 272.7KB |
