Patrolboat Hellas 3D Printer Model
The file 'Patrolboat Hellas 3D Printer Model' is (stl) file type, size is 4.7MB.
The file 'Patrolboat Hellas 3D Printer Model' is (stl) file type, size is 4.7MB.
This are parts for a plan model out of 1989 from the german "modellwerft" magazine.
For interessted people the plan might be found online under "Patrolboot Hellas".
The small tender in the back is this file scaled:
https://www.thingiverse.com/thing:3479147
This is a work in progress so new things will be added.
most of the parts should be easily printed only for the rockets you have to test.( I printed them with a brim and circular support)
If you have any questions feel free to ask.
| AGM-22.stl | 1.1MB | |
| Aufbau1.stl | 1.4MB | |
| bergang_wellenabweiser.stl | 211.0KB | |
| Brücke.stl | 130.8KB | |
| Deck_Hinten.stl | 2.4KB | |
| Deck_Hinten_Dach_1.stl | 3.6KB | |
| Deck_Hinten_Dach_2.stl | 209.7KB | |
| Deck_Vorne.stl | 1.4KB | |
| Deck_Wellenabweiser.stl | 432.5KB | |
| Heckträger.stl | 6.0MB | |
| Jetschutz.stl | 169.4KB | |
| Kranfuß.stl | 162.4KB | |
| RL-Bottom.stl | 209.5KB | |
| RL_mitte.stl | 58.6KB | |
| RL_Top.stl | 147.6KB | |
| Sitz.stl | 605.6KB | |
| Sitz_Fuß.stl | 87.8KB | |
| Stabilisatoren.stl | 484.0B | |
| Stabilisatoren_front.stl | 16.9KB | |
| Steuerrad.stl | 2.0MB | |
| Treppe.stl | 16.7KB | |
| Tür.stl | 814.1KB | |
| Wandabschnitt.stl | 1.4KB | |
| Wände.stl | 41.3KB |
