Designed for a 5.5mm steel ball. Resize in your slicer software if needed.
Use 291% for a 16 mm marble version
My own view of a ball game. This is the working prototype.
Prints without supports.
No rules for the time beeing. To be developed.
Not suitable for young children, due to small parts.
Comments welcome.
Version V3 looks better. May 20, 2024
Latest parts are prefixed "V3-"
This is a "living" project :)
PARTS subject to changes:
V4-switch
The template allows to drill a DIY plate for 16mm version, with suitable pegs.
| M2.stl | 572.7KB | |
| M8.stl | 309.1KB | |
| MovingV3.stl | 40.3KB | |
| Plate-large.stl | 2.3MB | |
| Plate-medium.stl | 1.8MB | |
| Plate.stl | 751.4KB | |
| Template.stl | 55.2KB | |
| V3-All.stl | 368.2KB | |
| V3-Curved2.stl | 572.7KB | |
| V3-Enter.stl | 273.9KB | |
| V3-Half.stl | 297.0KB | |
| V3-Moving.stl | 40.3KB | |
| V3-One.stl | 236.8KB | |
| V3-Three.stl | 316.6KB | |
| V4-Switch.stl | 319.2KB | |
| Val1.stl | 299.1KB | |
| Val10.stl | 311.6KB | |
| Val2.stl | 312.8KB | |
| Val5.stl | 309.3KB |
