I slightly changed the Martin 7187 project. It is now suitable for Bosch MUM 4/5.
The fixator is printed separately, because if you print together, it will be impossible to install one nut. Glued the fixator with dichloromethane.
(To unscrew the regulator, you need to remove its wall (I did it with a thin knife) and unscrew the nut)
| Fixator_for_L_Base_.stl | 82.2KB | |
| PastaMaker_Base_Plate_L1.stl | 120.9KB | |
| PastaMaker_Base_Plate_R.stl | 490.2KB | |
| PastaMaker_Cover.stl | 623.7KB | |
| Shaft.stl | 340.9KB |
