Parkside X20 “HAMMER LIGHT” 3D Printer Model
The file 'Parkside X20 “HAMMER LIGHT” 3D Printer Model' is (stl) file type, size is 2.2 MB.
The file 'Parkside X20 “HAMMER LIGHT” 3D Printer Model' is (stl) file type, size is 2.2 MB.
Great for Hammering in the dark !!! XDXD
follow the schematics and part list!
features:
-can use 1 or 2 batteries independent
-use direct mode or with a wifi module (optional)
-2 fittings 6mm useful in work sites
-there's a hole if your Wi-Fi module brings a separate IR remote control
-loop on tip for lanyard
-the 2 side holes in base side holes are for insert a 6mm rod in case of need more stability in rough terrain
Tips:
cut the 2 meter aluminium bar by 3 parts result in a 75 cm height (with adapter) light.
must open holes in the aluminium bar to secure it 3 on TIP and 3 in BODY is enough.
press the brass fittings with a solder iron.
don't forget the diodes to prevent balancing the two batteries when connected.
i think its great for camping and work, hope you like it...
..... thingiverse problems in generating stls previews.....
| x20_team_LIGHT_bar_GUIDE.stl |
| x20_team_LIGHT_bar_LID.stl |
| x20_team_LIGHT_bar_MAIN_BODY.stl |
| x20_team_LIGHT_bar_TIP.stl |
