Parkside X 20V To Bosch 14.4V Adapter 3D Printer Model
The file 'Parkside X 20V To Bosch 14.4V Adapter 3D Printer Model' is (stl) file type, size is 194.5KB.
The file 'Parkside X 20V To Bosch 14.4V Adapter 3D Printer Model' is (stl) file type, size is 194.5KB.
A converter that allows mounting a Parkside X20V team battery to Bosch 14.4V power tools.
In the design, I tried to retain as many elements from the original battery as possible. I do not know if components from other manufacturers' replacements will fit.
You will be able to use the following original parts:
The top cover (with the Bosch connector)Bosch connector4 Torx screws, 2 of which need to be shortened by about 3mm - measure it yourself2 release buttonsAdditionally, you will need:
2 pen springs (diameter about 5mm)2 wires, 10cm in length, with a cross-section of at least 2.5mm²2 male 6.3mm connectors used in automotive applicationsRemember, after disassembling the original battery and removing the connector, do not forget to properly dispose of the original cells!
| Parkside2BoschConverter.stl | 625.8KB |
