Parkside To Bosch Adapter – Battery Adapter 3D Printer Model
The file 'Parkside To Bosch Adapter – Battery Adapter 3D Printer Model' is (stl) file type, size is 665.2KB.
The file 'Parkside To Bosch Adapter – Battery Adapter 3D Printer Model' is (stl) file type, size is 665.2KB.
Hi! This is my first upload to thingyverse, and I hope it is helpfull.
I wanted to replace the battery on my old Bosch cordless drill. The original battery was Ni-cd and to find an original or even a compatible one meant I had to pay a lot of money and still buy old technology. So I decided to use a Parkside Li-On 20 volt battery which I could buy for 25 euro with its charger in Germany, or 49 euro for the whole drill with battery and charger here in Greece.
I made a 3d printed piece that the Parkside battery can slide in and out and glued the piece on the original Bosch battery, soldered the connectors and worked like a charm.
You can my design for any similar cordless modification if you want to use parkside battery with any old drill.
I used PETG for mine but I have also printed in PLA and ABS. ABS has to be resized for shrinkingHope you find it help full!| Parkside_to_Bosch.stl | 7.1MB |
![[Update] Brompton Carrier Dock Adapter 3D Printer Model](https://res.3axis.co/2db18bcc-a9a6-4bfc-bcad-c9dcbacd4724/images/82601805-af19-4470-8f16-594b959e93b7_thumb.jpg)
