This is a set of parametric vise soft jaws. This model is base on my previous Vise Soft Jaw Design (http://www.thingiverse.com/thing:1376177).
The length and width of the soft jaws can be altered to accommodate any vise. As well the knurling pattern on the front jaws face can also be altered. A V-groove has also been included for holding round materials.
Below are all the dimensions that can be adjusted.
//vise dimensions
viseLength = 100;
jawWidth = 12.7;
thickness = 6.35;
//knurl pattern settings
knurlAngle = 45;
knurlWidth = 0.5;
knurlDepth = 2;
knurlSpacing = 7;
//v groove size
vGrooveSize = 10;
//Dimensions of magnets
magnetSize = 5.1; //oversize magnet hole slightly to ensure close fit
magnetSpacing = 25;
Edit: The V-groove position can now be adjusted. As well there is an option to choose either circular or cubic magnets.
| viseSoftJaws.scad | 3.7KB | |
| viseSoftJaws_3in.stl | 427.4KB | |
| viseSoftJaws_4in.stl | 592.7KB | |
| viseSoftJaws_5in.stl | 778.8KB |
