For use with standard metal pegs from 2.54mm (1/10") inline sockets.
Specifiy diameter of the pin ring, diameter of pin holes, number of pins and height of socket.
Defaults are for IW-18 VFD tube.
Extract the socket pegs from the inline plastic and insert them into the printed socket, pushing down with a soldering iron heated to around 150°C (302ðF). I recommend solder wires to the socket pins before inserting them to avoid damaging the printed socket, although it is possible to solder the wires after insertion.
| 22_pin_tube_holder.stl | 330.5KB | |
| parametric_tube_socket.scad | 376.0B |
