Parametric Storage Box With Snap-on Lid 3D Printer Model
The file 'Parametric Storage Box With Snap-on Lid 3D Printer Model' is (stl,f3d) file type, size is 9.3MB.
The file 'Parametric Storage Box With Snap-on Lid 3D Printer Model' is (stl,f3d) file type, size is 9.3MB.
Fusion 360:
Change parameters for desired compartment dimensions. Add 1.5-2 mm if storing cards or tiles.
Set XY instance parameters from 1-15.
Increase/decrease tolerance parameter by 0.05-0.1 if lid is too tight/loose.
If model corrupts, try Compute All (Ctrl+B).
Slicer:
For Box - No solid bottom layers to save on time and filament.
For Lid - No solid top and bottom layers . Use cubic 21% (or similar strength) infill. About 6-9 perimeters for rigidity.
11/16/2023 - Bottom compartment curvature can now be set separately between X and Y.
11/28/2023 - Fixed corner rounding.
11/29/2023 - Removed patterns from workflow for compute stability. Added some parameter constraints.
| Box.stl | 5.9MB | |
| Box80x80x22_1x1o12b12.stl | 2.4MB | |
| Lid.stl | 278.6KB | |
| Lid80x80x22_1x1o12b12.stl | 434.3KB | |
| StorageBox.f3d | 8.4MB |
