In case you lost or broke the sprinkle nozzle for your watering can, or want a different spray pattern, look no further.
The holes are "drilled" in a slant fashion, helping to get a nice spray pattern.
The default neck diameter is 25mm, slightly coned, but you can change this.
The form of the main cone is controlled by cone_dia (cone diameter assuming no bevel) and cone_len (cone length, or height if you wish), but also by cone_bevel, which controls the size of the beveled part along the circumference. Do not make the cone_len too small compared to cone_dia, or you will have problems building the resulting flat angle properly.
Parameter wall is the general wall thickness. A thinner wall means shorter print time, but do not make it too flimsy.
The spray pattern is controlled by the parameters nozzle_dia (size of each opening) and nozzle_dist (distance between openings). Reduce nozzle_dia and nozzle_dist to get a softer spray.
| sprayer.scad |
| sprayer.stl |
| sprayer_narrow.stl |
![Customizable Plectrum ([guitar] Pick) 3D Printer Model](https://res.3axis.co/9a53e487-c349-402a-a587-2ffa375bc090/images/4a54637d-17dd-4f05-8622-caa3dda3ff4f_thumb.jpg)
