I know there are tons of spool holders on here but I thought with all the different spools out there, there is a need for customizable spool holders. Also, I wanted to 'spiff' it up with the ability to dual extrude. I have now made several and use a 1/4-20 bolt to hold down to a board with a T-slot that goes behind my printer.
Using OpenScad, you can specify size of spool, bearings, dual extrude or not... etc
This is my first published OpenScad script. Any comments/suggestions would be appreciated.
| 127x67_Dual.thing | 208.7KB | |
| 202mm.thing | 149.4KB | |
| 202x67_74_Dual.thing | 218.7KB | |
| 202x67_74_Top.stl | 3.4MB | |
| 202x67_Bot.stl | 235.8KB | |
| 202x67_Dual.thing | 147.2KB | |
| 202x67_Top.stl | 2.4MB | |
| 202x72_Bot.stl | 243.9KB | |
| 202x72_Dual.thing | 147.5KB | |
| 202x72_Top.stl | 2.4MB | |
| SpoolHolder.scad | 12.7KB |
