Parametric Push Fit Spacer / Washer / Circlip 3D Printer Model
The file 'Parametric Push Fit Spacer / Washer / Circlip 3D Printer Model' is (stl,scad) file type, size is 445.5KB.
The file 'Parametric Push Fit Spacer / Washer / Circlip 3D Printer Model' is (stl,scad) file type, size is 445.5KB.
Customize your own push fit washer / circlip / spacer
in scad file typical parameters are below.
//...The diameter you want to grip [Default 10]
Inner_dia=10;// [5:0.5:26]
//...The larger the width the stronger the clip [Default 8]
//...Must be bigger than 5
width=8; // [5,6,7,8,9,10,11,12,13,14,15,16]
//...The smaller the grip_angle the stronger the push fit [Default 45]
grip_angle=45;// [30:1:60]
//...Washer thickness
washer_thickness=1.2;
| 10mm_Push_fit_washer.stl | 302.4KB | |
| 11mm_Push_fit_washer.stl | 300.7KB | |
| 12mm_Push_fit_washer.stl | 307.3KB | |
| 13mm_Push_fit_washer.stl | 308.1KB | |
| 14mm_Push_fit_washer.stl | 311.0KB | |
| 15mm_Push_fit_washer.stl | 307.8KB | |
| 16mm_Push_fit_washer.stl | 311.6KB | |
| 17mm_Push_fit_washer.stl | 312.8KB | |
| 18mm_Push_fit_washer.stl | 315.7KB | |
| 19mm_Push_fit_washer.stl | 314.8KB | |
| 20mm_Push_fit_washer.stl | 323.5KB | |
| 5mm_Push_fit_washer.stl | 243.8KB | |
| 6mm_Push_fit_washer.stl | 288.6KB | |
| 7mm_Push_fit_washer.stl | 294.8KB | |
| 8mm_Push_fit_washer.stl | 301.5KB | |
| 9mm_Push_fit_washer.stl | 297.9KB | |
| Push_fit_washer.scad | 2.1KB |
