There are quite a few parametric containers on here, but most of them are done in Fusion and I wanted to make one in OpenSCAD. It pretty much relies on the Belfry OpenSCAD library, so you'll need to install it in order to render new variants of the file.
A few key points:
| container_threaded.scad | 1.9KB | |
| container_threaded_100x100.stl | 1.7MB | |
| container_threaded_100x25.stl | 1.8MB | |
| container_threaded_100x50.stl | 1.8MB | |
| container_threaded_100x75.stl | 1.8MB | |
| container_threaded_40x100.stl | 1.6MB | |
| container_threaded_40x25.stl | 1.7MB | |
| container_threaded_40x50.stl | 1.7MB | |
| container_threaded_40x75.stl | 1.6MB | |
| container_threaded_50x100.stl | 1.6MB | |
| container_threaded_50x25.stl | 1.6MB | |
| container_threaded_50x50.stl | 1.6MB | |
| container_threaded_50x75.stl | 1.6MB |
