Parametric Clip 3D Printer Model
The file 'Parametric Clip 3D Printer Model' is (stl,scad) file type, size is 419.9KB.
The file 'Parametric Clip 3D Printer Model' is (stl,scad) file type, size is 419.9KB.
Parametric clip
Blend radius makes a strong print
Make your own in OpenSCAD typical parameters are shown below.
Diameter_to_grip=20;
Number_of_clips=1;
clip_height=12;
width_of_base=34;
depth_of_base=7;
clip_wall_thickness=2;
center_line_distance=36;
I have not put any holes in as I intend to print 100% infill and drill my own for fixing
or just screw in from the back.
| 10_0ff_8mm_clip_standoff_3mm.stl | 1.8MB | |
| 15mm_clip_standoff_7mm.stl | 290.4KB | |
| 1_0ff_8mm_clip_standoff_3mm.stl | 208.5KB | |
| 20mm_clip_standoff_17mm.stl | 296.6KB | |
| 20mm_clip_standoff_7mm.stl | 296.6KB | |
| 20mm_clip_standoff_7mm_wall_thk_2.stl | 281.1KB | |
| 20mm_clip_standoff_7mm_wall_thk_2_base_20.stl | 247.1KB | |
| 2_off_20mm_clip_standoff_7mm_wall_thk_2.stl | 529.0KB | |
| 5_0ff_15mm_clip_standoff_7mm.stl | 1.1MB | |
| Parametric_clip.scad | 1.9KB | |
| Parametric_clip_21.5.stl | 250.1KB |
