Since I made them, I would never fly back with standard risers. Better feeling.
With this kit, no need to dismount the brake line.
Need to be screwed with Hamond plastic screws:
Ref → Hammond Self Tapping Screw (1591TS100BK)
Can be found on RS, Digikey, Farnell, etc.
Why those screws? For me the best ones for plastic, that keep the torque over time.
Print preferably one in Red (left) and one in Green (right), 100% infill, in PETG or PC.
One set need x4 parts x2 peer side)
Tested on my Skywalk Masala 3, Ozone Delta 2 and Niviuk Roller 2
x2 version available, one for strap type risers and one for swirel.
Let me know if you need an other variant, I would be happy to make it.
Disclaimer → You use this part as your own risk. I'm not responsible for any issue due to the installation / usage .
| 2Fingers_Brake_Strap.stl | 2.2MB | |
| 2Fingers_Brake_Swirel.stl | 2.3MB |
