Ho creato su base Triumph, il paracatena per Street Triple 2013.
Ho settato la macchina con:
Infill = 30%
Supporto = Brim
Thickness = 0.2mm
Già con questi valori risulta molto resistente.
Created on Triumph base, the chain protection for Street triple 2013.
The 3d-printer setting that I use was:
Infill = 30%
Support = Brim
Thickness = 0.2mm
With this property, the result was good and the object is very strong
| paracatena.stl | 141.2KB |
