I received my copy of Papillon Gardens the other day in the mail, and upon unboxing it, I discovered the contents EVERYWHERE. The game box was far too big, the stamp pads had escaped and two had become uncapped (I did save them, don't despair), the punchboards were half punched just from travel...the box was a mess. So of course, I had to fix it. This insert is more of a divider with a couple removable trays and a place for full-length pencils, plus an ink tray JUST IN CASE one of the stamp pads decides to leak. The ink tray is entirely optional to print.
There is a spacer for underneath the paper pads. I suggest you print this with no top or bottom layers to save on filament. For this, I used the honeycomb infill. The spacer can be removed if you acquire more paper pads for the game, but it may destabilize the seat of where the card and token tray sits. My printed prototype passes the shake test, although due to the stamp pads, I'll be storing it flat.
Enjoy!
| PapillonGardenInkTrayOpt-Body.stl | 24.5KB | |
| PapillonGardenMain-Body.stl | 28.9KB | |
| PapillonGardenSpacer-Body.stl | 1.4KB | |
| PapillonGardenTray-Body.stl | 3.0KB |
