Paper Crimper For Handmade Card Booster Packs 3D Printer Model
The file 'Paper Crimper For Handmade Card Booster Packs 3D Printer Model' is (stl) file type, size is 125.3KB.
The file 'Paper Crimper For Handmade Card Booster Packs 3D Printer Model' is (stl) file type, size is 125.3KB.
This is a remix of the paper crimper by jetty as well as the remix of said paper crimper from MarcElbichon.
I wanted to make some handmade card boosters but if you only have two gears you will smack the crank into the booster pack and destroy it.
I customized the base to fit 3 gears and now you can use the crank without hitting the paper.
And I also only wanted to crimp the thin top and bottom part of the booster so I resized the gears and rods that go into them.
The gears are now 6.6mm high.
You need to print two of gear 1 and one of gear 2.
I printed the gears at 10-15mm/s to ensure they turn out nice and even.
The base with the paper guide is modified from MarcElbichon, I made space for 3 gears and shortened the guide a little!
Original paper crimper by jetty: https://www.thingiverse.com/thing:17634
Paper crimper remix by MarcElbichon: https://www.thingiverse.com/thing:1275107
| Base.stl | 78.2KB | |
| Crank.stl | 16.9KB | |
| Gear_1.stl | 135.4KB | |
| Gear_2.stl | 132.7KB | |
| Handle.stl | 7.7KB | |
| Rods.stl | 37.0KB |
