Panda Props Arrow Caddy 3D Printer Model
The file 'Panda Props Arrow Caddy 3D Printer Model' is (stl) file type, size is 561.0KB.
The file 'Panda Props Arrow Caddy 3D Printer Model' is (stl) file type, size is 561.0KB.
This is an arrow caddy / holder I designed for backyard / field / club use.
Many people will use a 3" PVC pipe and screw that into a 2x6 to hold arrows. These are commonly used at archery clubs and camps. I found it's difficult to carry these when you might also be carrying your bow or quiver or other field gear especially if you are helping others.
Print one of the handles upside down (top side on your bed) and the base with the flat side down. I used #8 screws to screw the base into the piece of wood. A 2x6 works well. in my photo I had some 1/2" plywood that I glued together for the bases.
Insert an 18" section of white 3" PVC pipe. Make sure to check the dimensions as different countries use different diameters of pipe for plumbing. Of course you can simply scale the model to suit your needs.
Then simply glue the handle on top. I used CA glue to join the PVC pipe to the base and the handle.
Have fun and happy shooting!
| Arrowcaddy_base.stl | 1.2MB | |
| Arrowcaddy_handle.stl | 853.5KB |
