Pan tilt for 38mm board camera, and with holder for mobius / runcam camera.
You need a 3+ 3 + 8 roller baring and a 3mm screw and a lock-nut.
Also needed are 4 + 2 + 25mm screw and nut ,and some 2 +10 self tapping screws
| 38mm_kamera_hus.stl | 240.9KB | |
| pan_tilt_1+.stl | 339.4KB | |
| pan_tilt_2.stl | 210.0KB | |
| pan_tilt_3.stl | 170.6KB | |
| pan_tilt_4.stl | 164.4KB |
